E-FLITE 60 AMP ESC :: Aircraft Brushless Esc's :: Brushed/Brushless ESC's

CALL US: 1-850-471-9800

Hobby Central Military Div. :: Brushed/Brushless ESC's :: Aircraft Brushless Esc's :: E-FLITE 60 AMP ESC

E-FLITE 60 AMP ESC

Key Features
Up to 60-amp continuous current with proper air flow, 75-amp peak
5-volt Switch-Mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage
Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
Finned heat sinks
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V), or 70% of battery starting voltage
Programmable soft start for helis and airplanes
Auto motor shut down if signal is lost or there is interference
Programmable timing—5 user-selectable ranges for use with a larger variety of brushless motors
Programmable throttle input range (1.1–1.9 ms or 1.2–1.8 ms)
Utilizes new smaller MOSFETs technology to minimize weight
Radio System Power On/Off Switch
Optional RS232 Serial Link available for programming
Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
Overview
When performance matters in your high-current applications look no further than the E-flite 60-Amp Pro Switch Mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated Switch-Mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 60 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic endcaps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range, and more, the E-flite 60-Amp Pro Switch Mode ESC is truly a ‘pro series’ electronic speed control.

Specs
Brake:Yes - Programmable
Continuous Maximum Current:60A with reasonable cooling
Input Voltage:10.8V - 22.2V
Input Connector Types:13AWG with E-flite EC3 connector
Output Connector Types:13AWG with 3.5mm Female Gold Bullet Connectors
Momentary Peak Current:75A (15 sec)
Dimensions (WxLxH):76 x 33 x 13 mm (3 x 1.3 x .5 in)
Weight:66 g (2.3 oz)
Wire Gauge:13AWG
Cells w/BEC:3-6S Li-Po or 9-18 Ni-MH/Ni-Cd

Details


SKU	605482331545
Weight	0.40 lbs
Price:	$84.99

Options

Quantity

Add to cart

Add to wish list